Standaard doorslijpschijven voor perfecte metallografische preparatie

Contacteer ons Offerte-aanvraag

Premium aluminiumoxide doorslijpschijf Bond: resin / rubber

QPREP Aluminum oxide cut-off wheels cover a wide range of materials from 30 HV to >650 HV.

Productvoordelen

Wide range of application for various materials with different hardness’s
Long lifetime as well as low wear of the cut-off wheel
Premium abrasive particles enable the finest cutting surfaces, which shortens the following grinding steps
The synthetic resin bond allows dull abrasive particles to break out evenly during the cutting process

Aanbevolen toepassingen

Cutting of all materials

Bestelgegevens

Premium siliciumcarbide doorslijpschijf Bond: resin

Due to the lower hardness of silicon carbide particles compared to aluminum oxide particles, these cut-off wheels are the optimal choice for cutting soft as well as non-ferrous materials.

Productvoordelen

Optimized cutting performance for non-ferrous metals and ductile metals
Long lifetime as well as low wear of the cut-off wheel

Aanbevolen toepassingen

QPREP silicon carbide cutting discs NF-A are suitable for cutting soft (e.g., copper, aluminum, brass) and mediumhard non-ferrous metals and alloys (e.g., bronze, Monel, gunmetal, AlMn1Cu vs. AlMgSi0.5) as well as hard non-metallic materials (e.g., glass, stone).
QPREP silicon carbide cutting disc Ti-A for cutting non-ferrous metals, Ti alloys (e.g., Ti6Al4V, Ti5Al2.5Sn), and refractory metals (e.g., molybdenum, tantalum, niobium)

Bestelgegevens

Perfect cutting – Instruments by QATM

Cutting is more reliable, safe and efficient when processed with the right ingredients: knowledge, care and the right choice of consumables and instruments.

Discover our cutting devices

Kennis-databank

Wilt u meer weten over de verschillende procedures, bezoek dan onze uitgebreide Knowledge Base.

Ons Knowledge Base artikel over doorslijpen bevat:

Typische methoden om materialen te prepareren
De verschillende metallografische sectietechnieken
Hoe een geschikte doorslijpschijf te kiezen

Kennis-databank

.

QATM Producten & Contact

QATM offers a wide range of innovative machines for metallographic sample preparation. Accompanying QATM accessories and consumables are thoroughly tested and selected for perfect interaction with our machines. Contact us for a consultation, quote or to talk to one of our dedicated application specialists!

The Basics of Metallography - Producten overzicht

Metallographic Machines

Verbruiksartikelen

Voorbereidingsmethodes

Contacteer ons!

_{Onder voorbehoud van technische wijzigingen en eventuele fouten}