Прецизионный отрезной станок Qcut 150 A

Qcut 150 A - это универсальный прецизионный отрезной станок, который используется с отрезными кругами диаметром до 203 мм / 8 дюймов.

The compact benchtop model performs automatic as well as manual cuts with the ergonomic lever. The optional sample holder arm with built-in force sensor ensures low-deformation cuts due to a precise force-controlled feed rate.

Преимущества оборудования

До 5 различных режимов: ручной, автоматическая подача, подача с регулируемым усилием, режим шлифования, резка с приставкой стола (в зависимости от конфигурации станка)
Ручная поперечная подача
Функция зонной резки
Доступны 4 различных системы охлаждения
Устройство очистки и заточки диска
Интуитивное программное обеспечение QATM со встроенной базой данных

Смотреть видео

Этот прибор идеально подходит для геологии и минералогии.

Preparation guide for geology and mineralogy

Прецизионный отрезной станок Qcut 150 A Особенности

Резка с контролем усилия

Integrated force sensor in the sample holder arm precisely regulates the feed rate via the set cutting force
Constant cutting force throughout the process for clean cutting even of edge-hardened components and composite materials

Стол-приставка

Table attachment can be mounted without tools
Quick and manual sectioning of large samples, PCBs, or plate material

НОВИНКА: Зонная резка

Individual adjustment of feed rate or cutting force for single sections of the sample
Reduced material deformation and heating
Accelerated cutting process

All parameters at a glance

Robust 4.3" industrial touchscreen
Intuitive software with modern interface displaying all important cutting parameters
Extensive program storage and user account control

Режим шлифования

Target preparation: In grinding mode, samples can be ground manually or semi-automatically using a cup wheel
Ideal for thin sections and microelectronics

Vacuum clamping unit

Glass slides for thin sections can be fixed easily and without slipping

Reduces subsequent grinding processes

The use of the adaptive rotation axis leads to an even more uniform cutting pattern and reduces the risk of the cut-off wheel runout. This reduces the effort required for later plane-parallel grinding of the sample.

Прецизионный отрезной станок Qcut 150 A Superiority in detail

1. Sample holder arm

Tool-free quick-clamping system for mounting :
- Precision clamping devices
- Rotation device
- Vacuum clamping unit
Max. sample size: Ø 40 mm

2. Y-axis

Manual or automatic feed
Travel: 120 mm
Feed rate: 0.01–20 mm/s (automatic)
Cutting force variably adjustable: 0–10 N (optional)

3. Dressing device

For sharpening diamond cutting and grinding wheels
Can be operated manually from the outside

4. Robust machine body

Sturdy and corrosion-resistant stainless steel housing
Powder-coated, for easier cleaning

5. Transparent hood

Swivel hood with free access to the cutting chamber
Integrated safety switch

6. Z-axis

Manual cross feed
Travel: 25 mm
Position shown on the display
Positioning accuracy: 0.005 mm

7. Cut-off Wheel drive

Cut-off wheel size: Ø 75–203 mm / 8"
Drive power: 0.37 kW (S1)

8. Ergonomic Control panel

4.3" industrial touchscreen
Intuitive interface displaying process data
Storage of up to 200 user-defined cutting methods
User account management

Большой выбор зажимов и тисков

With the help of a suitable clamping tool from the extensive range of accessories, mounted or non-mounted samples up to a size of Ø 40 mm can be clamped in the cut-off machine comfortably

Зажимные приспособления

Optimal accessories for Qcut 150 A and 200 A Recirculation cooling systems

Optimal cooling is essential during sectioning. Excessive heat generation during the sectioning process damages the specimen and increases the wear of the cut-off wheel. The cooling and corrosion protection agent dissipates the heat and simultaneously removes the chips from the cut-off chamber.

15L Recirculation cooling system

Portable system with filter cartridge and lid
Small footprint required
Easy to integrate into existing laboratory furniture
Two-chamber system for filtration

45L Recirculation cooling system (Mobile)

Mobile unit with inlet strainer, filter bag and overflow
Can be placed under a lab bench or floor-to-ceiling cabinet
Expandable with optional pump module for cut-off chamber flushing
Two-chamber system for filtration with removable separating slide

45L Recirculation cooling system (System lab)

Mobile unit with retractable mechanism
Can be conveniently integrated into QATM system laboratory cabinets and cabinets with undershelves
Expandable with optional pump module for cut-off chamber flushing
Inlet strainer, filter bag and overflow
Two-chamber system for filtration with removable separating slide

Perfect cutting - Cut-off wheels from QATM

Резка более надежна, безопасна и эффективна, если для ее обработки используются правильные ингредиенты: знания, забота и правильный выбор расходных материалов и инструментов. The Qprep range includes specially developed cut-off wheels for a wide variety of materials and requirements.

Low thermal influence on the specimen during the cutting process
Wet abrasive cutting achieves very fine surface finishes after cutting
Optimal cutting shortens the further preparation process

К каталогу

Fast, Powerful, Flexible - Qtool Clamping devices

Our innovative clamping devices are used to clamp workpieces securely and precisely to ensure exact cutting and grinding processes. There is a wide range of different clamping devices that have been developed for specific applications and workpiece sizes.

Suitable for regular and irregularly shaped samples
Fast, repeat-accurate clamping of regularly shaped samples
Large range of different clamping tools and systems available

К каталогу

Прецизионный отрезной станок Qcut 150 A Характеристики

Отрезной круг	ø 75 - 203 мм/8"
Варьируемая скорость	150 - 3000 об/мин
Макс. режущая способность	ø 40 мм
Размер вала	ø 12.7 мм
Переменная регулируемая сила резки	0 - 10 Н
Подача	0,01 - 20 мм/с (автоматически)
Движение по оси Y (вертикальное движение стола)	120 мм (вручную / автоматически)
Ручная ось Z (параллельная резка)	25 мм (ручное)
Точность положения по оси Z	0,005 мм
Мощность мотора	0,37 кВт (S1)
Потребляемая мощность	0.75 кВА
Габариты ШхВхГл	545 x 391 x 566 мм
Вес	~ 45 кг (зависит от оборудования)

_{Содержание может быть изменено или исправлено}