Ontvang uw offerte – afgestemd op uw exacte vereisten
Selecteer de producten die u nodig heeft en bouw uw aanvraaglijst in enkele seconden.Onze experts zullen uw selectie bekijken en een nauwkeurige, vrijblijvende offerte maken.
Uw voordelen:
- Bespaar tijd door meerdere items in één keer aan te vragen
- Vermijd fouten met deskundige beoordeling en aanbevelingen
- Ontvang een duidelijke, toepassingsgerichte offerte – geen verplichting vereist
Uw aanvraaglijst is altijd zichtbaar in de rechterbovenhoek, zodat u op elk gewenst moment kunt doorgaan.
Wij staan klaar om u te helpen!
Heeft u moeite met beslissen? Laat onze experts de perfecte selectie voor u vinden!
- Electrolytes
- Accessories for Qetch 100 M (Kristall 650)
- Etchants
- Accessories for Etching
- Lab accessories and equipment
- ULTRASONIC CLEANING DEVICES
- Accessories for microscopy
- Storage of samples
- Literature
Electrolytes
(consisting of two
components; total volume 1 litre), Description
Electrolyte for stainless steel, aluminum, aluminum alloys and special materials
Electrolyte for titanium
Electrolyte for grey iron
• Shipping of hazardous materials will be charged extra
• Download of Safety Data Sheets at www.qatm.com
1-component electrolytic etchant
95017935
Oxalic acid 10%, electrolytic etchant for Cr and CrNi steels,
for carbide precipitation at grain boundaries in ferritic and austenitic alloys
1 l
Accessories for Qetch 100 M (Kristall 650)
Electrolyte-bottle with screw top
Accessories set for Qetch 100 M (Kristall 650) in suitcase
Z6201001
Suitcase (single-order No.):
• 5 pcs V-ring (Order No.: 95003606)
• 1 pc profile ring material, appr. 150 mm (Order No.: 06201052)
• 1 pc flexible end piece for profile ring (Order No.: 06201051)
• 1 pc tube cutter (Order No.: 95004030)
• 10 pcs filter pads Ø 40.5 mm (Order No.: 95003985)
• 1 pc dolphin clamp (Order No.: 82000374)
1 pc
Etchants
95014346
VisiPro-I Etchant for visualizing the former austenitic grain boundaries (for quenched or tempered low-alloy quenched and tempered steels and case-hardened steels)
500 ml
95014347
VisiPro-I Etchant for visualizing the former austenitic grain boundaries (for quenched or tempered low-alloy quenched and tempered steels and case-hardened steels)
1 l
95017581
VisiPro-I Fast etchant for visualization of former austenite grain boundaries on quenched and tempered unalloyed and low alloy steels through bearing steels (e.g. 102Cr6). Etching time: approximately 2 to 6 minutes, depending on the material.
500 ml
95017582
VisiPro-I Fast etchant for visualization of former austenite grain boundaries on quenched and tempered unalloyed and low alloy steels through bearing steels (e.g. 102Cr6). Etching time: approximately 2 to 6 minutes, depending on the material.
1 l
95014348
VisiPro-II Etchant for visualizing the former austenitic grain boundaries (for quenched or tempered low-alloy quenched, tempered case hardening steels and anti-friction bearing steels)
500 ml
95014349
VisiPro-II Etchant for visualizing the former austenitic grain boundaries (for quenched or tempered low-alloy quenched, tempered case hardening steels and anti-friction bearing steels)
1 l
92002601
Heyn Etchant (for steel, phoshorous segregations, macro etching, copper alloys, brass)
1 kg
92002605
V2A etchant (for austenitic steels), applied at approximately 60°C, contains the additive Dr. Vogel's economy etchant, which acts as an inhibitor and optimizes etching performance
1 kg
95002408
Murakami Etchant (for hard metals, molybdenum/molybdenum alloys, chromium alloys, tungsten and tungsten alloys)
1 kg
[LL:iid.safety_data_sheets]
Storage bottle for used etchant
Accessories for Etching
Etching bowl, DURAN® glass with cover, heat-resistant
Etching bowl, polyethylene (PE),
Etching bowl, polypropylene (PP), with screw coupling
Crucible tong
Lab accessories and equipment
Face protection shield according to DIN EN 166 1 3 - S
Protective laboratory apron, made of PVC, with neck and side bonds, clean edges, without fabrics
Nitrile disposable gloves, blue
Nitrile disposable gloves, green
Nitrile disposable gloves, orange
Protective gloves black, comply with standard EN 388, EN 374
95003208
Protective gloves, black, size L
- high resistance to water-soluble chemicals
- very durable
1 pair
Safety goggles conforms to EN 166, length-adjustable
Mounting adhesive
Cotton wool
Specimen cleaning wipes
Sample protection laquer
Bottles
Measuring cylinder
Specimen drying unit
ULTRASONIC CLEANING DEVICES
Ultrasonic cleaning device 100
Ultrasonic cleaning device 106
Cleaning concentrate, alkaline
Cleaning aids
Pane cleaning for fume cupboard
Electric engraving device
Replication set
Replica system for non-destructive analyzing of microstructures
quick cured 2 components compound for applying to surfaces;
the cured replica can be removed easily and analysed directly
Assembly cleaner
Precision replication material
Replica system
• for surface structures (metallic or mineral),
for surface roughness inspection (R, Ra)
Accessories for microscopy
Supporting accessories
M1321000
Specimen press
• for parallel fixation of specimen on microscope slide
• comfortable operation with minimal effort
• compact, robust and durable
• made of aluminum with anodised surface
1 pc
